Belt Weigher Systems

WestWeigh manufacture a complete range of Belt Weighing Systems to suit all applications and accuracies. Installations range from weighing shredded domestic waste at 10 tph to loading ships at 8000 tph and higher. Whatever your requirement – we have the solution.

The Single Idler System (SIBW)

The Single Idler System (SIBW) is a low cost solution ideal for plant inventory, control and indication. It is also perfect for all mobile plant applications and is “factory fitted” by many of the leading machine manufacturers. The low profile weighframe utilises two precision load cells and is maintenance free. It is quick and easy to install and most systems are fitted by the customer. Full telephone technical support is always available from WestWeigh if required. Naturally WestWeigh can install the system if preferred.

The Dual Idler System (DIBW)

The Dual Idler System (DIBW) is a modular fully floating weighframe utilising four precision load cells. The system is recommended where the engineering data indicates that an increased weighspan is required for the desired system accuracy. This system has been used extensively in the waste processing / re-cycling industry.

The Four Idler System (FIBW)

The Four Idler System (FIBW) is an extended version of the dual idler system. Four load cells are used and the extended weighframe carries four idler sets (or more) to give the enhanced weighspan. This system is used where the very best accuracy is required with long periods of operation between calibration routines.

All of the systems are designed to operate reliably in the most arduous conditions. The belt weigher weighframes are supplied with a galvanised finish and all mounting hardware is Zinc plated. Stainless steel weighframes are available to order as are specialised paint finishes.

The modular construction of the DIBW and FIBW systems makes assembly of even the largest weighframe an easy task for two technicians without the need for special lifting equipment. It also ensures that the unit can be packed in the smallest possible case for economical shipment to any country in the world.

Belt Speed compensation is standard for all systems.

All systems are available with either the CBC or CBC-M integrators depending on the specific application.

For all Sales and Technical enquires please contact: –

The CBC Belt Scale Integrator

Westweigh Intergrator

The CBC Integrators are specifically designed for continuous weighing of materials transported by conveyor belt. The integrators can be supplied as separate instruments or as a complete weighing system. The CBC can also be used to retro-fit or upgrade almost any belt weigher system currently in use.

The CBC offers advanced features, including management reports – user friendly, menu driven, instructions – interface with printers / computers etc. – comprehensive diagnostic reports enabling instant, free technical support for low cost of ownership.

The New CBC-Touch Integrator


The CBC-Touch is the brand new belt weigher indicator from WestWeigh Controls. 

Precision electronics combined with an easy to read colour touchscreen display and comprehensive storage and communication options provide a state of the art solution for belt weigher installations.

  • High resolution colour touchscreen display.
  • Simple step-by-step tare and calibration routines.

  • Dead Range and Automatic Zero Adjustment.

  • Comprehensive Production and Management Reports.

  • Automatic Angle Compensation.

  • Configurable RS232/485 Serial Interface and USB port.

  • Analogue Output and Network Connectivity options.

Tilt Switches

A full range of Tilt Switches are available for Level Monitoring and Blocked Chute Detection. Three models are available for materials ranging from dust to 100mm and different accessories and cables can be supplied depending on the application.

For all Sales and Technical enquires please contact: –


Load Cells and Pressure Transducers

Load Pins

We now stock a wide range of TNC Electronics Ltd load cells for use in various applications. 

TNC Electronics manufactures Load Cells for a wide variety of weighing equipment, force measurement, and industrial systems. These products are used throughout many applications such as: silo/hopper weighing, vehicle weighing, platform weighing, belt weighing, pressure testing, and many more.

Please click on a link below to visit their product page.

Safety Switches for Belt Conveyor and Crane Systems

We are a UK supplier of DUK safety switches and products such as: Pullcord / Pullwire Switches , Belt Misalignment / Belt Tracking Switches , Lever Limit Switches, Geared Cam Limit Switches, or ATEX Zone 21 and 1 products. For more information and Data Sheets please visit their product page, or Contact us.

Belt Weighing Pull Switch

For any other information on our products & services, please Contact us.